Scott Fly Rod’s “G” Series – a look back

Scott Fly Rod’s “G” Series – a look back  Fly rods come and go. What’s hot today, is not tomorrow. Its all about market demands, I guess. This is not to say that change is a bad thing. This constant evolution has produced some mighty fine rods; we keep pushing ahead. Still it seems odd to think we really need all this flux. After all fishing doesn’t really  change that much. And it urks anglers to discover the high-end, top-of-line expensive rod they shelled out cash for is deemed outdated the following year.

Scott Fly Rod’s “G” Series – a look back

Years ago fly rod manufacturers took life at a slower pace, one in spirit with the soul of fly-fishing. A rod model would go on, and on. Scott’s original “G” series is a great example. Born in the mid 1970’s, they were in production, and hot demand for nearly three decades. (I believe “G” simply stood for graphite back then) Even today, anglers prowl the internet hoping to score a used one.  The original “G” series is legendary. I’m not kidding you.

Scott "G" Series rod

Scott Fly Rod’s “G” Series – a look back

Why are they so loved? For one thing, the quality was superb. Beautifully finished black unsanded blanks with great windings. Look in the picture above! Sweet. Gobs of workmanship there.  My”G” series rod also has a German silver uplocking reel seat, rosewood spacer, hard chrome stripping guides with agate-like rings, spigot ferrules, serial number appear on every section. Yes, there is a red dot for proper ferrule alignment. Even the rod sock is top notch, made from heavy weight, yet soft cloth. Now that’s attention to detail, my friend. And get this: I acquired this rod in the late 1980’s and even now, some 28 years, this original “G” series 4-piece, 7wt rod still looks fantastic.

Scott "G" series Internal Ferrule

Scott Fly Rod’s “G” Series – a look back

More importantly, the original “G” series were silky caster. With a moderate progressive action, they are wonderful wands, offering superb control at short to medium range. (34 million modulus graphite) Scott had developed a way of testing individual rod sections so – when mated – they worked as a whole. They called it “Flex Rating”. And the ferrules were part of that smooth performance too. Back in 1958, Jim Green had revolutionized nonmetal ferrules with his tip-over-butt design, dubbed the Fenwick Feralite Ferrule. As innovative as they were, these ferrules were challenged in the early 1970’s by the internal (spigot) ferrule. This type of ferrule was less likely to produce a “dead spot” in the action; it looked better too. Win,win.

Scott "G" series Reel Seat

Scott Fly Rod’s “G” Series – a look back

When you look at the whole package, it’s no wonder the original “G” series reached cult status. They’re “timeless” classic fly rods, as good on the stream now as they were then. I wish I owned a bunch. Anybody out there want to give me another one?

UPDATE:  7/ 2017  Scott has announced a new “G” series fly rod.  The original “G” series was replaced by the “G2” in 2006. I imagine this new reincarnation will be called the “G3”. I haven’t seen one yet.

At some point down the road, I’ll post on some other “oldie but goodies”, such as Winston “glass” rods. Amigo, I have a slew of them including a Stalker. Want to check out a Diamondback Diamondglass  4-wt fly rod? And I also own a fine, contemporary “glass” rod I’d like to show you. It was made by Japanese custom fly rod builder Yasuyuki Kabuto. Hope you’re fishing. Hope you’re having fun!

 

 

 

This entry was posted in Fly Rods, Gear. Bookmark the permalink.

11 Responses to Scott Fly Rod’s “G” Series – a look back

  1. Jim Franczyk says:

    Hello —
    I own a Scott 2 piece, 2 wt, 2.9 oz, 8.0 ft rod, with a serial # of G802-L09-26388. I love it! Many trout have come into my net as a result of it’s unique attraction.

    Can you give a little history? When and where was it made? What did it sell for new? and what would be it’s approximate value today? It is in very good condition!

    Thanks!

    Jim Franczyk

    • Ed Mitchell says:

      Jim,
      Wow nice fly rod! Give Scott a call. See if they will date the rod for you based on the serial number. Still you might check the rod tube or end cap. It should say where the rod was built, and that will narrow things down. Prior to 1993, the rods were made in San Francisco. Between 1993 and 1996 the rods came from Telluride. After that Montrose. Price? In excellent shape with sock and tube it should be worth about $300.
      Ed

  2. Ken Doe says:

    I have a Scott 8’5″ two piece with two tips. 6 “T’ and 7 “B”. Model# G 85737. Got it 30 or so years ago at a Sporting Good show in New York. Was told it was a custom rod. I contacted Scott and was told they do not have any record of it. Does any one have any knowledge of what it is?

    • Ed Mitchell says:

      Hey Ken,
      If Scott has no record of your rod, it is very likely they didn’t complete it. More likely your rod was a Scott rod blank, purchased by a custom rod builder, who then finished and sold the rod to you. You could try reaching out to Larry Kenney. I believe he worked for Scott many years ago. Larry now makes custom fiberglass fly rods. You should be able to find him on the net.
      Best of luck,
      Ed

  3. Ken Doe says:

    It is in a Scott Rod Tube “San Francisco” with a hand written Model#. It was personalized by A local Rod Maker.

    • Ed Mitchell says:

      Hey Ken,
      If it goes all the way back to San Francisco, then you should try to contact Larry Kenney. I believe he worked in Scott’s San Francisco shop.
      He’s your best bet.
      Ed

  4. RMan says:

    I just scored an unused 696 of Telluride vintage 🙂

  5. kevin says:

    i have a 8’6 5wt 2 piece 2.4 oz serial number g 855-03-18729 mint condition still in sock and tube only used one time that i know of. I cant find out much about it, any information on it would be amazing.

Leave a Reply to Ken Doe Cancel reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.