How and Why to install a skeg on your Diablo Adios

Part One: In this two-part post we’ll take a look at the “skeg” sold by Diablo Paddlesports. You can view this item on their website. http://www.diablopaddlesports.com/store.accessories

Why installed a “skeg” on your Adios? When you’re seated, the Adios “tracks” fine. When you stand, to paddle or pole, your weight shifts forward, causing the Adios to nose slightly downward. Now “tracking” can be an issue, especially in a crosswind. Tech types would prefer I said the Adios tends to “weathercock”. They would also insist this is not really a “tracking” issue, but a “trim” problem. Ok, Ok. Call it a “trim” problem; call it a “tracking” problem; call it what you like; the “skeg” is there to keep the Adios on course.

Adios Skeg installed

Dablo Adios with Skeg installed

Diablo has a “YouTube” video showing this installation. It’s a straight-forward job. So I’m going to be brief. In this photo the two arrows on the left show how the “skeg” plate bolts under the rear (stern) handle. Two 1”long ¼” bolts are supplied for this task. The right arrow shows that I elected to run the long bungee through the hole in the drain plug cap. It seemed a convenient thing to do.

In the last photo, you see a good position for the clam cleat. This locates it in easy reach of the Larry Chair. You’ll need to drill two 5/32” holes for the bolts. Insert the bolts, then remove the rear hatch cover, reach under and put the nuts on. A small socket drive is a real help. I used a 9mm, six-sided socket. It held the nuts securely, while I tighten things up with a Philips head screwdriver. The entire “skeg” installation took 30 minutes.

Clam Cleat position

Clam Cleat

 

 

This entry was posted in Diablo Adios & Chupacabra, Gear, Kayak / SUP Fishing. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.